[TRNSYS-users] trnsys3D plugin reconstruction

hotline hotline at transsolar.com
Thu Sep 9 03:00:45 PDT 2010


Dear Geoffrey,
 
the modell looks like that you started drawing based on a GOOGLE
SKETCHUP model and then build up the Trnsys3d zones.
I made the experience that this can cause a lot of problems like walls
are disappearing, two walls are appearing at the same place, if I erase
a wall 
and reload the drawing then there's still the wall existing, etc........

 
So in order to avoid these problems I made the experience that after I
built up the modell in the combined model (SKP and IDF) I have to copy
the whole idf geometry out of the zones 
to a new SKETCHUP drawing and to redefine the zones like:
 
1) Basis Sketchup geometry
 

 
2) Redraw the skp geometry in an idf zone

 
3) Copy the geomtry inside a zone

 
4) Open in parallel another Sketchup and insert a Zone

 
5) Paste in Place the geometry

 
That's it.
 
Then to stop the error message while opening GOOGLE SKETCHUP you have to
deactivate the Trnsys3d Plugin by the menu Window - > Preferences
 

 
Restart GOOGLE SKETCHUP and reactivate Trnsys3d.
 
Regards
Christian
 
 
TRANSSOLAR Software Team
hotline at transsolar.com                                 
 
www.trnsys.de         
Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäuden                                    
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911        
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher
 

  _____  

Von: Geoffrey VAN MOESEKE [mailto:vanmoeseke at matriciel.be] 
Gesendet: Donnerstag, 9. September 2010 09:44
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] trnsys3D plugin reconstruction



Dear trnsys users

 

I encounter the following problem when using trnssolar 3D plugin for
sketchup:

 

When I try to reopen a .idf fil build the previous days, many surfaces
appears to be badly interpreted.

 

The figure attached shows the problem.

 

I got the following error message:

 

ERROR:

ArgumentError

Duplicate points in array

 

BACKTRACE:

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/Surface.rb:131:in `add_face'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/Surface.rb:131:in `create_entity'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:83:in
`draw_entity'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:202:in
`update_model'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:197:in
`each_with_index'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:197:in `each'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:197:in
`each_with_index'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:197:in
`update_model'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:114:in `draw_model'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/ModelManager.rb:176:in `open_input_file'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/CommandManager.rb:71:in `open_input_file'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/MenuManager.rb:70:in `create_commands'

C:/Program Files/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/MenuManager.rb:70:in `call'

 

 

I use Sketchup 7.1.6860 and the plugin 1.0.4.85. using the 1.0.5.1
version of the plugin doesn’t seem to help.

 

Does anyone knows about those issues?

 

Best regards.

 

------------------------------------------------------------------------
---------------------------------------------------------

Geoffrey van Moeseke

ir.architecte

 

MATRIciel SA

Place de l'Université 25, 1348 Louvain-la-Neuve

tel: (+32) 10 24 15 70 - fax: (+32) 10 24 15 60

 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 122207 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0030.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 129084 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0031.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 152920 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0032.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 129950 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0033.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 131641 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0034.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 22384 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100909/e4f3aea4/attachment-0035.jpg>


More information about the TRNSYS-users mailing list