[TRNSYS-users] I finally found my mistake !

[COGNE Benoit (Axima Seitha)]

I refer to my previous question:
 
Finally this was coming from a stupid value of the convective heat transfer coefficient of a wall
 
Sorry for the ones who had a look at my file !

  _____  

De : COGNE Benoit (Axima Seitha) 
Envoyé : mercredi 8 septembre 2010 16:02
À : trnsys-users at cae.wisc.edu
Objet : [TRNSYS-users] Error in automatic heat transfer calculation forsurface


Dear all,
 
I get the following message:
 
** Fatal Error at time   :         0.000000
    Generated by Unit     :     2
    Generated by Type     :    56
    Message               : Error in automatic heat transfer calculation  for surface   7 or its adjacent surface!: Automatic heat transfer calculation is only allowed on surfaces within a zone.  Please check building input file (.bui)!
 
I presume it is coming from the fact that I changed the position of a zone description (zone Z7_CIRC) manualy in the .bui file.
 
Can some one tell me where is the error and how I can proceed (except re-describing completly the building zones)
 
Thank you for your help

Benoît COGNE 
Développement Efficacité Energétique 
___________________________________________________ 



Direction Commerciale 
46 Boulevard de la Prairie au Duc
BP 40119 - 44201 Nantes Cedex 02 
Tel. 02 40 41 00 81
mail: benoit.cogne at aximaseitha-gdfsuez.com
www.aximaseitha-gdfsuez.com

P Pensez à l'environnement avant d'imprimer ce message

 



GDF SUEZ Mail Disclaimer: http://www.gdfsuez.com/disclaimer/disclaimer-fr.html


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100908/3c387f87/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3512 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100908/3c387f87/attachment-0003.jpg>