[TRNSYS-users] TRNSYS-users Digest, Vol 69, Issue 8

[Samar-Jumah-Mustafa.Jaber at Tu-Ilmenau.De]

Dear Elias Sasati 

Try to check the range of your axises. May be the
heating and cooling load is out of your coordinate range. 

Samar


trnsys-users-request at cae.wisc.edu schrieb:  

Dear TRNSYS users,  After
creating my building in TRNBuild, setting the wall types, creating the
zones, manage the schedules and doing all the requirements, I try to
simulate the bulding in different climate data.  I am creating a new
multizone project in TRNSYS Simulation Studio and let the program guide me.
Then I double click on the building icon I am replacing the path with the
location of my .bui file in "External Files" tab.  I change the parameters
of the Temperature plotter (Type 65d) to meet the case and connect the:  


	* "temperature air node of ZoneN" (TAIR_N) -> "left axis variable N" 

 
and then the:  

 	* (sens. energy demand of zone N) QsensN -> "right
variable axis N".

  When I run the simulation I am getting only the room
temperatures without the energy demand plotted.   Any ideas how I can get
the energy demand (Q) for heating and cooling according to the climate data
to keep the zone temperatures fixed to my prefernce. I am using TNSYS 16.  
Thank you for your time, Elias Sasati    

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100906/0d83cc0a/attachment-0005.htm>