[TRNSYS-users] TRNSYS-users Digest, Vol 69, Issue 4

rgaray at labein.es rgaray at labein.es
Fri Sep 3 03:19:16 PDT 2010


Dear Luis,

The problem you are asking about can be solved by connecting inputs and 
outputs in type 56. (externally to the building definition).
If you want to connect them in series, you should output the active layer 
outlet temperature and connect it to an input to use it as inlet 
temperature for the second wall.

I hope this helps.

Best regards.

Roberto.

----- Mensaje de "Claros Marfil, Luis Jesus" <Centag51 at acciona.es> en Fri, 
3 Sep 2010 12:15:25 +0200 -----
Para:
"trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
Asunto:
[TRNSYS-users] Connecting two active walls
Hi TRNSYS users,
 
I’m using Type56, and I would need to connect two active layers in 
different walls of the same building. Is there any way to connect the 
pipes of both layers ? 
 
Any help is appreciated.

--------------------------------------------------------------------------
Roberto Garay Martinez
Labein-Tecnalia
Unidad de Construcción y Desarrollo del Territorio
c/Geldo. Parque Tecnológico de Bizkaia
Edificio 700
48160 Derio (Bizkaia)
Tel.: 34 94 607 33 00
Fax: 34 94 607 33 49
www.labein.es
---------------------------------------------------------------------------
Visite nuestro blog:
http://www.energiaenedificacion.com 
--------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100903/ec96a2b4/attachment-0005.htm>


More information about the TRNSYS-users mailing list