[TRNSYS-users] Azimut anlge

Matt Duffy duffy at tess-inc.com
Tue Sep 7 05:56:29 PDT 2010


Stefan,
You can always click on the 'More' button in the proformas for more
information. These more buttons have the information for the azimuth angle
for the orientations.

To answer your previous questions, I am not sure about the German TRY
files, but for interzonal air-coupling, you need to use an add-on bulk air
flow modeling program such as COMIS, TRNFlow, or CONTAM.

Best regards,

Matt Duffy


----- Original Message -----
From: "" <thiemann.stefan at vdi.de>
Sent: Sun, September 5, 2010 13:57
Subject:[TRNSYS-users] Azimut anlge


Hi,

there is another question concerning the azimut anlge in Trnsys for
 Type 109 and other types using the azimut angle. Which definition ist
 the right 0-360° as it is often defined in the manual or the way by
 describing the azimut wiht -90° for east and +90° for west?
The descriptions in the manual and in the types are highly
 irritating...


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----




More information about the TRNSYS-users mailing list