[TRNSYS-users] Modeling Boilers

[Fred Betz]

I've never tried this, but you might want to look at Type58 under Physical Phenomena/Thermodynamic Properties/Refrigerant and Steam and set the refrigerant for state parameter to 718 to be setup for steam.

Good luck

Fred Betz  PhD., LEED AP
Sustainable Systems Analyst



AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI  53719

P: 608.236.1175 | F: 608.238.2614
fbetz at aeieng.com<mailto:fbetz at aeieng.com>  |  www.aeieng.com<http://www.aeieng.com/>



From: GANAPATHY.IYER at Thermaxindia.com [mailto:GANAPATHY.IYER at Thermaxindia.com]
Sent: Thursday, October 28, 2010 12:22 AM
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Modeling Boilers


Dear Users,

I am trying to model a Steam boiler which I will run in series with a Parabolic trough. I am using the Boiler available in CoGen library. The challenge I am facing is that it requires the inlet enthalpy as input and I cannot link this with the trough.
Has anyone used a boiler, or is there any other boiler which I can use ?

Regards
Ganapathy Iyer
ACC - RTIC
THERMAX
================================================================================================================
Visit us at Delhi International Renewable Energy Conference (DIREC) 2010,
Hall # 2, Booth No. S-607, India Expo Centre & Mart, Greater Noida.
October 27(Wed) - 29(Fri), 2010

DISCLAIMER by THERMAX LIMITED
The information in this email is confidential and may be legally
privileged.It is intended solely for the addressee. Access to this email by anyone else is unauthorized.If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101028/cbd96317/attachment-0005.htm>