[TRNSYS-users] Exporting surface data on Trnsys3d

[hotline]

Hi Rémy,

this sounds like it doesn't find the link between data and surfaces. 
This can have two reasons:
- the ***_b17.idf has to be used in order to visualize the results. 
There the surfaces have the same surfaceID's as in TRNBUILD
- the initial value in the Trnsys3d Printer in the simulation Studio are 
not the same as the surfaceID's in TRNBUILD or the ***_b17.idf. These 
initial values are used to generate the link to the surface numbers in 
the 3D geometry.

Christian
 
TRANSSOLAR Software Team
hotline at transsolar.com                                 
 
www.trnsys.de         
Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen 
und Nutzerkomfort in Gebäuden                                    
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart / 
Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911        
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, 
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher

-----Ursprüngliche Nachricht-----
Von: Rémy Saulnier [mailto:remy_saulnier at holisud.fr] 
Gesendet: Mittwoch, 27. Oktober 2010 15:19
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] Exporting surface data on Trnsys3d

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users