[TRNSYS-users] PV_mode in 566 Type PV

[David BRADLEY]

Mesude,
   The easiest way to change the PV mode is to select "Replace" from the 
"Edit" menu in the Simulation Studio. A browse window will come up 
allowing you to replace your existing Type566 proforma with a different 
one (such as Type566-5 "PV mode 1, IAM mode 1)
Regards,
  David


On 10/22/2010 12:30, mesude bayrakci wrote:
> Hello,
> I have used Type 566 Glazed Building Integrated Photovoltaic Array in 
> my simulation.
> The PV mode parameter is 3 and IAM mode is 2 in the Type 566. I  want 
> to change  PV mode parameter, typical value, as a 1 or 2.
> I tried to change but it is not active, I couldn't change the number.
> How can I change PV mode and IAM mode?
> Also, which formula is used to calculate PV_cell temperature(in 
> output). I couldn't fine Mathematical Reference Volume?
> Thank you.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101025/a04a9723/attachment-0005.htm>