[TRNSYS-users] Simulation studio 16 to 17

[David BRADLEY]

Sumaila,
   The other three inputs (ground reflectance, solar zenith angle, and 
solar azimuth angle) should all be produced by your weather component 
(ideally Type15 or if not, Type109.)
Regards,
  David


On 10/20/2010 14:54, aongya.sumaila at lte.ireq.ca wrote:
> Hello,
> I tried to open a project made with Simulation Studio (and TRNSYS) 16 
> and I get the following error message: " Updated type 56 for TRNSYS17. 
> Please connect the new inputs (GRDREF, TSGRD, AZEN, AAZM)!
> For backward compatibility to TRNSYS 16 set TSGRD = Tamb". To what 
> variables should I connect the 3 remaining inputs?
> Is that the only change needed to convert my project from SS16 to 17? 
> If not, what are the steps?
> Thank you very much!
> /Sumaila Aongya/
> Stagiaire universitaire
> Laboratoire des technologies de l'énergie (LTE)
> 600, avenue de la Montagne
> Shawinigan, QC, G9N 7N5
> Tel: 819-539-1400 poste 1340
> Courriel: aongya.sumaila at lte.ireq.ca <mailto:aongya.sumaila at lte.ireq.ca>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101020/5dba02f2/attachment-0005.htm>