[TRNSYS-users] type 109 with 5 minutes time step

[hotline]

Dimas,
 
did you also adjust the "Time corresponding to first data line" ?
 
<firsttime> 1          ! Time corresponding to first data line (hours)

In addition, you need to set the simulation time step to 5 minutes.
 
Marion
 
 

  _____  

Von: Dimas Firmanda Al Riza [mailto:dimasfirmanda at gmail.com] 
Gesendet: Montag, 18. Oktober 2010 02:33
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] type 109 with 5 minutes time step



Dear all, 

I have 5 minutes time step weather data, 
How to conduct simulation with 5 minutes time step using type 109, 
do I need to change something in the .109 data file?
I've try to just change the data in .109 file from 1 hour time step with
my 5 minutes time step data
but when I run simulation with 5 minutes time step the results become
weird,
Thank you very much

Regards,

Dimas Firmanda A.
MSc student
Mechanical Engineering Department
Universiti Teknologi PETRONAS


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101018/5454712a/attachment-0005.htm>