[TRNSYS-users] get the simulation data from TRNSYS

[Hermann Schranzhofer]

Dear Wang,

for getting simulation data in text format you have to use one of the type25 (Printer). There are different settings possible (look at the manuals). You have to connect the outputs you want for your analysis to the printer and than you get a text file on your hard disk where you can find the values.

Best regards,
Hermann Schranzhofer.


_______________________________________________________________

 DI Dr. mont. Hermann Schranzhofer
 Institut fuer Waermetechnik / Institute of Thermal Engineering
 TU Graz / Graz University of Technology       
 Inffeldgasse 25 / B, A-8010 Graz      

 Tel.:  +43 316 873 7314
 mobil: +43 664 60 873 7314
 Fax :  +43 316 873 7305
 http://www.iwt.tugraz.at/
_______________________________________________________________

  
________________________________________
Von: 王洋 [mailto:wanghongyang1767 at gmail.com] 
Gesendet: Freitag, 15. Oktober 2010 13:27
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] get the simulation data from TRNSYS

Dear all,
 
How to get the simulation data from TRNSYS? How to export them from simulation software into .txt format etc. ? I want to use these simulation data and values.
 
thanks!
 
br.
 
wang
2010/10/14 <trnsys-users-request at cae.wisc.edu>
Send TRNSYS-users mailing list submissions to
       trnsys-users at cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
       https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
       trnsys-users-request at cae.wisc.edu

You can reach the person managing the list at
       trnsys-users-owner at cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."

Today's Topics:

  1. Re: Problem with Type42b data file in TRNSYS17 (David BRADLEY)


---------- 已转发邮件 ----------
From: David BRADLEY <d.bradley at tess-inc.com>
To: Philipp Lezajic <philipp.lezajic at yahoo.de>
Date: Thu, 14 Oct 2010 10:17:00 -0500
Subject: Re: [TRNSYS-users] Problem with Type42b data file in TRNSYS17
Philipp,
  Make sure that you have a recent Trnsys17 release (the most recent, I believe is 17.00.0019). I seem to recall that one of the earlier releases had a bug in the InterpolateData routine (which is called by Type42). If you do have the most recent version, please send your input file along and I will have a look.
Regards,
 David


On 10/13/2010 09:02, Philipp Lezajic wrote: 
Hi,

I am using performance data file/type42b with 2 independent and 1 dependent variable

20.0 50.0
10.0 20.0 30.0
1
2
3
4
5
6

In TRNSYS 17 the output for the dependent variable is always "6", no matter what values the independent variables have. The performance data file and the deck file are attached. In TRNSYS 16 the same performance data file works and the output of the dep. variable is as expected.

Has anyone come across this before? Thanks in advance for help!

regards Philipp



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
  


-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Hermann Schranzhofer.vcf
Type: application/octet-stream
Size: 208 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101015/ceefe318/attachment-0005.obj>