[TRNSYS-users] Results for QSEN (NTYPES 2) do not appear after the simulation.

[hotline]

In the connection between Qsens of Type 56 is NOT contected to Type 65 !
 
Regards,
 
Marion
 
 
  _____  

Von: GANAPATHY.IYER at Thermaxindia.com
[mailto:GANAPATHY.IYER at Thermaxindia.com] 
Gesendet: Mittwoch, 13. Oktober 2010 12:39
An: hotline
Betreff: Re: AW: Re: AW: [TRNSYS-users] Results for QSEN (NTYPES 2) do
not appear after the simulation.



The files you sent ran properly, but when I created the same, (I took
care to update the building vriables) I does not give me any output. 

Regards 

========================================================================
========================================
DISCLAIMER :
The information in this email is confidential and may be legally
privileged.It is intended solely for the addressee. Access to this email
by anyone else is unauthorized.If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted to
be taken in reliance on it, is prohibited and may be unlawful. When
addressed to our clients any opinions or advice contained in this email
are subject to the terms and conditions.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101014/6df85a25/attachment-0005.htm>