[TRNSYS-users] Going back to TRNBuild after modifications in TRNSYS3D

[Angela Dröscher]

Hi,

you have to update your idf-file with the modifications you did in Trnbuild, then do the modification in SketchUp and finally re-import it in Trnbuild.
You can find a description how to do that in the Type56 manual in chapter 5.2.2.3 (page 5-15).

Best regards
Angela

--
Technische Universität Graz
Institut für Wärmetechnik
Inffeldgasse 25/B
A-8010 Graz
Tel.: (+43) 316 873 7307
Fax: (+43) 316 873 7305
http://www.iwt.tugraz.at

Am 13.10.2010 15:42, schrieb aongya.sumaila at lte.ireq.ca:
> Hello,
> I did my building using TRNSYS3D plugin for SketchUp, I imported it into TRNBuild and added gains and equipment. At one point, I noticed that I had some windows missing from the building so I went back to TRNSYS3D and added them. Now, I'm trying to import the new building into TRNBuild but it doesn't want to reflect the modifications. Is it possible to update the TRNBuild file after a modification of the geometry on TRNSYS3D? If so, what are the steps to follow?
> Thanks for your help and time!
> /Sumaila Aongya/
> Stagiaire
> Laboratoire des technologies de l'énergie (LTE)
> 600, avenue de la Montagne
> Shawinigan, QC, G9N 7N5
> Tel: 819-539-1400 poste 1340
> Courriel: aongya.sumaila at lte.ireq.ca <mailto:aongya.sumaila at lte.ireq.ca>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users