[TRNSYS-users] Simulating a double skin facade with interior blinds

[Stift Florian]

Dear TRNSYS - Community,

I have a question about simulating a façade system with shading elements.

I need to simulate an office room with a double skin façade (not ventilated) with an interior shading system.
The shading system has a very complex geometry, so which inputs would be needed to model the shading system, and how does TRNSYS deal with the mass of the blinds, heating up the space between the glass panes.

Thanks for your help,

FLORIAN STIFT, DI(FH)
Energy Department
Sustainable Building Technologies

AIT Austrian Institute of Technology
Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H.
Giefinggasse 2 | 1210 Vienna | Austria
T +43(0) 50550-6277 | M +43(0) 664 815 79 46 | F +43(0) 50550-6613
florian.stift at ait.ac.at<mailto:florian.stift at ait.ac.at> | http://www.ait.ac.at
FN: 165088b HG Wien | UID: ATU46577208 This email and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please notify the sender by return e-mail or by telephone and delete this message from your system and any printout thereof. Any unauthorized use, reproduction, or dissemination of this message is strictly prohibited. Please note that e-mails are susceptible to change. Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. shall not be liable for the improper or incomplete transmission of the information contained in this communication, nor shall it be liable for any delay in its receipt.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101004/fe63eb6a/attachment-0005.htm>