[TRNSYS-users] Questions about the fan-coil unit in a heating or cooling system

[David BRADLEY]

Chen,
  If you have access to the TessLibs17, you can use Type987 (four-pipe 
fan coil in the HVAC library). If you have the TessLibs v2 then there is 
only a 2-pipe (heating) fan coil - Type664 but you can assemble a fan 
coil using a heating coil model, a cooling coil model, and a fan.
Regards,
  David


On 11/23/2010 07:45, CHEN Xi wrote:
> Dear users:
> I tried to simulate a heating device with a water-to-water heat pump, 
> and would like to find a fan-coil unit model in TRNSYS library as the 
> heating terminal connected to the load side of the water-to-water heat 
> pump. Could anyone recommend a type to me to simulate the performance 
> of a fan-coil unit. Thank you very much!
> Sincerely,
> CHEN
> 2010-11-23
> ------------------------------------------------------------------------
> CHEN Xi
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101130/0b2b75d3/attachment-0005.htm>