[TRNSYS-users] Underground temperature field of TYPE 557a

[David BRADLEY]

Chen,
  Type557 does produce a number of additional outputs; what you would 
need to do is to open the Type557.for file and find where the various 
elements of the OUT() array are set For example, the line that sets the 
9th output looks like:

  OUT(9) =TUTMED(0)

You can add the additional outputs to your Type557 proforma and you do 
not need to do anything else (no need to recompile the code).
Best,
  David



On 11/25/2010 06:06, CHEN Xi wrote:
> Dear Users:
> I am using TYPE-557a as the ground heat exchanger for the modeling of 
> the ground source heat pump. In the TESS manual I found that TYPE-557 
> could calculate the temperature distribution around borehole and 
> output the temperature field by simulation. But TYPE-557a only has one 
> output called "average storage temperature". I wonder if anyone knows 
> where to find the specific output file of this module, which includes 
> the change of underground temperature field.
> Sincerely,
> CHEN
> 2010-11-25
> ------------------------------------------------------------------------
> CHEN Xi
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101130/b426a2a5/attachment-0005.htm>