[TRNSYS-users] error message when generating shading/insolation matrix

[Philipp Lezajic]

Hi Angela,

thanks for your reply!

Hotline told me the same. I have more than 999 surfaces so I have to simplify my model :-(

regards Philipp

--- Angela Dröscher <angela.droescher at tugraz.at> schrieb am Fr, 26.11.2010:

Von: Angela Dröscher <angela.droescher at tugraz.at>
Betreff: Re: [TRNSYS-users] error message when generating shading/insolation matrix
An: trnsys-users at cae.wisc.edu
Datum: Freitag, 26. November, 2010 16:21 Uhr

Hi,

check the surface numbers in Trnbuild - I got this error when I had 4-digit surface numbers (even if i had far below 999 surfaces in my model).
If it's the same case for you, ask your distributor for help; I was told from the Transsolar hotline that this problem should be fixed in the latest Version of Trnsys.
If you have more than 999 surfaces in your model: I'm sorry I don't know how to fix this problem....

Best regards
Angela

---
Technische Universität Graz
Institut für Wärmetechnik
Inffeldgasse 25/B
A-8010 Graz
Tel.: (+43) 316 873 7307
Fax: (+43) 316 873 7305
http://www.iwt.tugraz.at

Am 26.11.2010 15:33, schrieb Philipp Lezajic:
> Hi,
>
> when generating the shading/insolation matrix I get an error message (the screen shot of the message is attached). Any advice for troubleshooting is highly appreciated :-)
>
>
> regards Philipp
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101129/eb1c132e/attachment-0005.htm>