[TRNSYS-users] Ground source heat pumps

[SUNLIANG CAO]

Dear Aziz,

If you want to simulate a ground source heat pump, you can try the following models:

1, TYPE 504 (in GHP/TESS library) as you said, "water-source heat pump", but actually it is "water(exterior side, eg, connecting to borehole heat exchanger) -air (room side)" heat pump
2, TYPE 668 (in HVAC/TESS library), "water-water heat pump". This is the type which I normally used for the water (exterior side)-water(room side) heat pump.


Kind Regards,
Cao Sunliang
Aalto University School of Science and Technology,
Finland


Date: Sat, 20 Nov 2010 12:39:00 +0000
From: azizej2002 at yahoo.fr
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Ground source heat pumps

Hello,
 
I want to simulate a ground source heat pumps with trnsys (well without groundwater) and I want to use U tube Heat exchanger. With which type  for heat pump can I do that? In TESS example I have found Type 504 but for water source heat pumps.
 
Thanks in advance.
 
Best regards.
 Aziz





      
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101121/ef8f74fb/attachment-0005.htm>