[TRNSYS-users] type56

[David BRADLEY]

Zhou,
You treat the atrium wall as though it were a lot of smaller walls, each 
one adjacent to one of the other zones.
regards,
  David


On 11/18/2010 03:57, 周雯雯 wrote:
> dear sir：
> The popurse to write to you is  to find out how to create a building 
> which has some especial feature in the real life.
>  For example a building has an atrium which is drawn in the 
> attachment. I tried doing it, but failed. I think the mainly reason is 
> that the adjacent wall beetween adjacent rooms must be the same eara. 
> But in an atrium building, the atrium is adjacent to many zones at the 
> same time.so would you like to tell me how to get a building with an 
> atrium using type56?
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101118/7a9991a3/attachment-0005.htm>