[TRNSYS-users] To Integrator type 55 or 24

王洋 wanghongyang1767 at gmail.com
Tue Nov 30 07:17:35 PST 2010


Dear all,

I have a question to ask you.

To Integrator:1. I want to calculate one Zone's all heating energy by
QHEAT(only using real heating not floor heating). Should I select Type 55 or
24? If Type 55, which Item can I use? Integral of Input or Count of Input?
I only want to calculate one day's Zone's all heating energy by QHEAT. How
to link the Type 55 to QHEAT and Type 65d? I want to get the results of one
day's heating Energy by Plotter or detailed value. Please tell me in detail.

2.  I want to calculate one Zone's  heating energy by Qalfl (only using
floor heating not real heating). Like above, How to link it to type 55 and
type 65d. I want to get the results of one day's heating Energy by Plotter
or detailed value. Please tell me in detail.



Many thanks!

Br.

2010/11/30 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. TRNSYS - Matlab Kopplung ?ber den Type155 (Bastian Lang)
>   2. To Integrator type 55 or 24 (=?GB2312?B?zfXR8w==?=)
>
>
> ---------- 已转发邮件 ----------
> From: Bastian Lang <lang at upp-kassel.de>
> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
> Date: Tue, 30 Nov 2010 06:49:32 +0000
> Subject: [TRNSYS-users] TRNSYS - Matlab Kopplung über den Type155
>
> Hallo,
>
>
>
> ich bin gerade dabei TRNSYS mit Matlab zu koppeln. Dabei haben sich
> allerdings eine Schwierigkeiten ergeben. Zuerst einmal beschreibe ich kurz,
> was ich vor habe:
>
>
>
> 1.       TRNSYS (16.1) berechnet eine Gebäudetemperatur und übergibt diese
> an Matlab (R2010b bzw. 7.11).
>
> 2.       Matlab (Simulink S-Function in C) berechnet daraus die
> Wärmeübertragung an eine weitere Komponente. Hieraus ergibt sich die
> Energie, die dem Raum entzogen werden soll.
>
> 3.       Diese Energiemenge wird dann im nächsten Schritt dem
> TRNSYS-Modell übergeben und dem Gebäude entzogen.
>
> 4.       Im darauffolgenden Zeitschritt wird die neue Energiemenge zur
> Berechnung der nächsten Raumtemperatur verwendet.
>
>
>
> 5.       Dieser Ablauf wiederholt sich für jeden Zeitschritt.
>
>
>
> Jetzt ist es so, dass das File: „Type155_CallingMatlab.m“ mit Dummywerten
> für die TRNSYS Eingangsparameter fehlerfrei arbeitet, es ruft die s-Funktion
> auf und übergibt Daten aus dem Workspace.
>
> Sobald ich nun aber die Dummywerte gegen die TRNSYS Eingangsparameter
> ersetze, funktioniert das File nicht mehr. Ich habe weitere einfachere
> Berechnungen ausprobiert und bin dabei zu dem Schluss gekommen, dass das
> File zu folgendem Problem kommt:
>
> *Wird die Datei „Type155_CallingMatlab.m“ von TRNSYS aufgerufen, ist es
> nicht in der Lage, Daten in den Workspace zu schreiben, bzw. Werte daraus zu
> entnehmen.*
>
> Wie gelingt mir dennoch eine Datenübergabe?
>
> Hat jemand damit Erfahrung?
>
>
>
>
>
> Mit freundlichen Grüßen
>
> Bastian Lang
>
>
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>
>
>
> Dipl.-Ing. Bastian Lang
>
>
>
> Universität Kassel
>
> Institut für Produktionstechnik und Logistik
>
> Umweltgerechte Produkte und Prozesse
>
>
>
> Kurt-Wolters-Straße 3
>
> D-34125 Kassel
>
>
>
> fon +49.561.804 3649
>
> fax +49.561.804 3995
>
>
>
> Lang at upp-kassel.de
>
> www.upp-kassel.de
>
>
>
>
> ---------- 已转发邮件 ----------
> From: 王洋 <wanghongyang1767 at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Tue, 30 Nov 2010 15:59:45 +0100
> Subject: [TRNSYS-users] To Integrator type 55 or 24
> Dear all,
>
> I have a question to ask you.
>
> To Integrator: I want to calculate one Zone's QHEAT. Should I select Type
> 55 or 24? If Type 55, which Item can I use? Integral of Input or Count of
> Input?
> I only want to calculate one day's QHEAT. How to link the Type 55 to QHEAT
> and Type 65d? I want to get the results of one day's heating Energy by
> Plotter or detailed value. Please tell me in detail.
>
> Many thanks!
>
> Br.
>
> wang
>
> 2010/11/30 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>>        trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>>        trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>>        trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>>   1. Re: solar radiation units of weather data type109
>>      (Kersken, Matthias)
>>   2. New component creation with g95 (???)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Kersken, Matthias" <Matthias.Kersken at ibp.fraunhofer.de>
>> To: "Laia Cases - iMat" <lcases at imat.cat>, <trnsys-users at cae.wisc.edu>
>> Date: Wed, 24 Nov 2010 13:57:01 +0100
>> Subject: Re: [TRNSYS-users] solar radiation units of weather data type109
>>  Dear Laia!
>>
>> In the climatefile W/m² are/have to be used but the output of Type109 in
>> the simulation studio is kJ/m²h (factor 3.6).
>>
>> With kind regards,
>>     Matthias Kersken
>>
>>
>> ---
>>
>>
>>
>> *Dipl.-Ing. Matthias Kersken
>> *Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme
>>
>> Fraunhofer-Institut für Bauphysik
>> Institutsteil Holzkirchen
>>
>> Fraunhoferstraße 10
>> 83626 Valley
>>
>> eMail: Matthias.Kersken at ibp.fraunhofer.de
>> Telefon 08024 / 643-204
>> Telefax 08024 / 643-366
>> www.ibp.fraunhofer.de
>>
>>    *Dipl.-Ing. Matthias Kersken
>> *Research Associate / Department Energy Systems
>>
>> Fraunhofer Institute for Building Physics
>> Branch Holzkirchen
>>
>> Fraunhoferstraße 10
>> D-83626 Valley
>>
>> eMail: Matthias.Kersken at ibp.fraunhofer.de
>> Phone +49 8024 / 643-204
>> Fax +49 8024 / 643-366
>> www.ibp.fraunhofer.de
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ---
>>
>>
>>  ------------------------------
>> *Von:* Laia Cases - iMat [mailto:lcases at imat.cat]
>> *Gesendet:* Mittwoch, 24. November 2010 12:47
>> *An:* trnsys-users at cae.wisc.edu
>> *Betreff:* [TRNSYS-users] solar radiation units of weather data type109
>>
>> hi everybody,
>>
>> I am getting confused about the units of solar radiation (direct beam,
>> etcc) when using type109: In mathematical reference , 5-432, it says in
>> W/m2, but in studio type109 in out description says kJ/hm2.
>>
>> what are the correct one?
>>
>> thanks in advance
>> Laia
>> --
>>    *Laia Cases*
>> Unitat de Condicionament Tèrmic
>> *iMat - Centre Tecnològic de la Construcció
>> lcases at imat.cat
>> www.imat.cat*
>>  Wellington 23  ·   E-08018 Barcelona
>> T +34 93 553 97 95
>> F +34 93 553 97 96
>> Imprimiu aquest document només si és necessari
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: 김영일 <yikim at seoultech.ac.kr>
>> To: TRNSYS users <trnsys-users at cae.wisc.edu>
>> Date: Sun, 28 Nov 2010 17:56:59 +0900 (KST)
>> Subject: [TRNSYS-users] New component creation with g95
>> Dear TRNSYS users,
>>
>> I am trying to create a new component with g95 compiler.
>> I had no trouble creating one with TRNSYS 16.1 but since I
>> have upgraded to TRNSYS 17, it's not working any more.
>>
>> With TRNSYS 17, the structure of the new component generated
>> by Simulation Studio is different than it used to be. I noticed that
>> the arguments are no longer existent and command lines with
>> $$ are newly seen. I don't see the output arrays any more.
>> Is this normal with TRNSYS 17 or did I do something wrong?
>>
>> Following lines which were automatically inserted with Simulation Studio
>> are in error.
>> $$PARAMETER_DEFINITIONS
>> $$INPUT_DEFINITIONS
>>
>> I am attaching two files which I hope will explain my situations.
>> One is a fortran file generated by Simulation Studio.
>> This other one is a list of error comments shown after I ran
>> g95 compile.bat.
>>
>> Thanks.
>>
>> Youngil Kim, SNUST
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101130/5b25aaa7/attachment-0001.htm>


More information about the TRNSYS-users mailing list