[TRNSYS-users] Incident radiation

[David BRADLEY]

Luis,
  There are a lot of factors that could be contributing (different wall 
material properties between the simulated and "real" wall, different 
solar absorption coefficient for the wall, different 
convection/radiation split, etc.) I would also recommend that you read 
in the Type56 manual about how it treats radiation gains to a surface 
and what wavelengths are included.
Regards,
  David


On 11/11/2010 01:42, Claros Marfil, Luis Jesus wrote:
>
> Dear Trnsys Users,
>
> I try to simulate the heating that a lamps panel provides to a wall. 
> In order to do that, I measure both the incident radiation that 
> arrives to the wall and its temperature. However, after giving TRNSYS 
> the measured radiation value, the wall temperature I get in the 
> simulation is sensible lower than in the real wall. Any help about this?
>
> Thanks in advance
>
> *Luis J. Claros-Marfil*
>
> Este mensaje se dirige exclusivamente a su destinatario, y puede contener información confidencial sometida a secreto profesional, o cuya divulgación esté legalmente prohibida. Cualquier opinión en él contenida es exclusiva de su autor y no representa necesariamente la opinión de la empresa. Si ha recibido este mensaje por error, le rogamos nos lo comunique de forma inmediata por esta misma vía y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo. El correo electrónico vía Internet no es seguro y no se puede garantizar que no haya errores ya que puede ser interceptado, modificado, perdido o destruido, o contener virus. Cualquier persona que se ponga en contacto con nosotros por correo electrónico se considerará que asume estos riesgos.
>
> This e-mail is addressed exclusively to the recipient and may contain privileged information under a professional confidential agreement or it may be against the law to disclose its contents. Any opinion contained in it belongs exclusively to his/her author and does not necessarily reflect the company's view. If you receive this e-mail in error, please let us know immediately (by return e-mail) and proceed to its destruction, as well as any document attached to it. The sending of e-mails through the Internet is not safe and, therefore, error-free communications cannot be guaranteed, as they can be intercepted, changed, misled or destroyed or they might contain a virus. Any user contacting us through e-mails shall be understood to be assuming these risks.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101111/eb834257/attachment-0001.htm>