[TRNSYS-users] Insert a window in a wall with a boundary condition

Jade Deltour jade.deltour at uclouvain.be
Fri May 7 06:09:17 PDT 2010


Hello,

I am modeling a local as single zone with boundary condition. I would like
to insert a window to one of the walls of the  local. But with the boundary
condition, I couldn’t. To resolve this problem, I defined the window surface
as a part of the wall with massless layer and the corresponding resistance.

 Is it an other solution (maybe more realistic) to insert a window in a wall
with a boundary condition?

Thanks in advance,

Kinds Regards,

 

Jade Deltour

----------------------------------------------------------------------------
-------------------------------------------------------

archetclimat.jpg

Jade Deltour, Ir civil en Mathématiques Appliquées.

UCL - ARCHITECTURE ET CLIMAT

 

Tél  :+32 10/47.91.52

Fax  :+32 10/47.21.50

http://www-climat.arch.ucl.ac.be

Place du Levant,1 B-1348 Louvain-la-Neuve

----------------------------------------------------------------------------
-------------------------------------------------------

 logo_Plea2011_xsm Visitez www.plea2011.be <http://www.plea2011.be/> 



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/5fd8a51b/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1488 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/5fd8a51b/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 4916 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/5fd8a51b/attachment-0007.jpg>


More information about the TRNSYS-users mailing list