[TRNSYS-users] TRNSYS 16 - Error from the beguinning

[David Bradley]

Samar,
   I think solving the first (jpg1) error might solve all the others. 
This error occurs when TRNBuild fails to launch the application that 
generates the building transfer function coefficients. When that fails, 
then the rest of the procedure of creating a building file and default 
project fails as well. If you are using Vista or Windows7 and have 
TRNSYS installed in the Program Files directory, you either need to have 
administrator rights on your computer or (preferably) you should install 
TRNSYS somewhere else (on the root of the c:\ drive for example). I 
think that with these operating systems, software is not able to write 
inside the Program Files directory.
Best,
  david


On 5/2/2010 15:21, Samar Jaber wrote:
> Dear Sir/Madam,
>
> I downloaded TRNSYS 16 on my PC and I started to built my Model "Building
> Multizone" Unfortunately after I finalized the 10 step and click on "create
> model". Then, series of error messages appeared. These Errors are attached with
> this E-mail.
>
> Thank you in advance for your kind assisstance.
>
> Best Regards,
> Samar Jaber
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>    
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100503/b8850e3a/attachment-0005.htm>