[TRNSYS-users] FW: trnsys

[Guy THOMAS]

Hi everybody,
Concerning my problem I also feel that maybe there is too much links in my project? Is there any limitation on the number of links on simulation studio?
Guy THOMAS
CNAM Student
From: guytho at hotmail.com
To: trnsys-users at cae.wisc.edu
Subject: trnsys
Date: Fri, 14 May 2010 09:25:28 +0000








Hi everybody,
I have a problem on trnsys simulation studio. I'm controlling various zone of a building and until now i had no problem to see on the online plotter the temperature and the flow rate going on the zones. But now, I've just added one more controlling system for an other zone of the building by doing a copy/paste as I have done for all the others zones of the building until now. Then, I connect the temperature of the zone to the plotter and it run the simulation OK. But, when I add the links between the pid and the plotter to see the flowrate (as I have done for all the others zones by replacing the links on the plotter with the new zone added) and I try to run the simulation I have this message error: "One error was found in the deck chek the listing file for more information" so I try to open the listing file but instead it close my simulation studio file. 
Does anybody know the reason of this problem? 
Kind regards
Guy THOMAS
CNAM student
 		 	   		  
Envie de plus d'originalité dans vos conversations ? Téléchargez gratuitement les Emoch'ticones ! 		 	   		  
_________________________________________________________________
Découvrez Windows Phone 7 : Une nouvelle ère de téléphones !
http://www.microsoft.com/windowsmobile/fr-fr/cmpn1/windowsphone7series/default.mspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100514/de68e139/attachment-0001.htm>