[TRNSYS-users] (no subject)

[Jade Deltour]

Hello,

I am modeling a local as single zone with boundary condition. I would like
to insert a window to one of the walls of the  local. But with the boundary
condition, I couldn’t. To resolve this problem, I defined the window surface
as a part of the wall with massless layer and the corresponding resistance.

 Is it an other solution (maybe more realistic) to insert a window in a wall
with a boundary condition?

Thanks in advance,

Kinds Regards,

 

Jade Deltour

----------------------------------------------------------------------------
-------------------------------------------------------

archetclimat.jpg

Jade Deltour, Ir civil en Mathématiques Appliquées.

UCL - ARCHITECTURE ET CLIMAT

 

Tél  :+32 10/47.91.52

Fax  :+32 10/47.21.50

http://www-climat.arch.ucl.ac.be

Place du Levant,1 B-1348 Louvain-la-Neuve

----------------------------------------------------------------------------
-------------------------------------------------------

 logo_Plea2011_xsm Visitez  <http://www.plea2011.be/> www.plea2011.be



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/368d25ae/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1488 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/368d25ae/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4916 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100507/368d25ae/attachment-0003.jpeg>