[TRNSYS-users] TRNBuild, "File C:\ Program does not exist".

[chiassad at notes.udayton.edu]

I see what the issue is. I ran the simulation from the Studio also with no 
problems. Then, I ran the TRNSYS input file from TRNBuild and got the same 
error message as Aaron. 

In the TRNBuild environment, go to Options, Settings, and put the TRNSYS 
Input File path and quotes. Then it should run.


Andrew Chiasson, Ph.D., P.E.
Assistant Professor
University of Dayton
Department of Mechanical and Aerospace Engineering / Renewable and Clean 
Energy
300 College Park Dr. 
Kettering Labs, Room 361
Dayton, OH 45469-0238
937-229-2892 (W)
937-229-4766 (Fax)

David Bradley <bradley at tess-inc.com> wrote on 03/11/2010 10:59:39 AM:

> David Bradley <bradley at tess-inc.com> 
> 03/11/2010 11:02 AM
> 
> To
> 
> "Aaron J. Danenberg" <danenberg at hartford.edu>
> 
> cc
> 
> trnsys-users at cae.wisc.edu
> 
> Subject
> 
> Re: [TRNSYS-users] TRNBuild, "File C:\ Program does not exist".
> 
> Aaron,
>  Are you able to run the ..\Trnsys16_1\Examples\Building
> \building.tpf from the Simulation Studio? It sounds as though 
> somewhere there is a pathname that has a space in it (Program Files)
> and that the path name is not being enclosed in quotes. When you 
> select "Run TRNSYS Input File" are you doing that from within 
> TRNBuild or from the Simulation Studio?
> Best,
>  David
> 
> 
> Aaron J. Danenberg wrote: 
> I am new to TRNSYS.  I am attempting to follow a Multizone building 
> tutorial found in Volume 6 of the manual on page 73, for a one story
> house with a roof.  I have completed all tasks as indicated in the 
> manual up to the point where you are instructed to “test” the zone. 
> When I “Run the TRNSYS Input File”, I receive an error stating “File
> C:\ Program does not exist”.  Under settings I have specified the 
> directory where the TRNEXE is located along with the correct 
> location for the American library I use.  The TRN Input location was
> set to load SunSpace.dck (within the main trnsys directory), I have 
> not changed this option.  I have set all of the directories for the 
> Simulation Studio.  Please let me know how to set the correct 
> directory, or what I am doing wrong to receive this error.  Thanks!
> 
> Aaron J. Danenberg
> University of Hartford
> Mechanical Engineering Graduate Student
> danenberg at hartford.edu
> 
> 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> 
> 
> -- 
> ***********************************************************************
> Thermal Energy System Specialists (TESS), LLC 
> David BRADLEY                      22 N. Carroll Street - Suite 370 
> Partner                            Madison, WI 53703 
>                                    USA
> P: +1.608.274.2577 
> F: +1.608.278.1475
> E-mail: bradley at tess-inc.com 
> Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com
> 
> ***********************************************************************
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100311/b9fc9db8/attachment-0005.htm>