[TRNSYS-users] Type 107 - Data File problem

[Bjoern Nienborg]

Type 177 by Jan Albers comes with data for a few different chillers. I 
am not sure if the parameters are up to date but I think it is more than 
the standard data file for Type 107 has to offer.

http://www.eta.tu-berlin.de/fileadmin/a33371300/Redakteurbereich/Mitarbeiter_wimis/Jan/Type177_20080221.zip

Regards, Björn



Nicolàs Rey schrieb:
> Dear TRNsys users,
>
> I have a problem with type 107, the absorption chiller. In the Data file
> folder of TRNsys installation there is only one data file which can be used
> with this type. The problem is that I need to utilize the hot water with a
> temperature in a different range, and not only between 108.89 and 116.11 °C
> , the range of the data available.
>
> Should I use data available on the internet? And if so, What’s the procedure
> to use them? I checked in the Mathematical reference but it is not so clear.
>
>
> If someone of you could give me some help, I would be really grateful ,
> because I need to use this file for my master thesis ( upon solar cooling)
> and I don’t have so much time!
>
> Best regards,
>
>
> Nicolàs Rey
>
> Student in Mechanical Engineering,
>
> Cagliari, 09125 Italy
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Dipl.-Ing. (FH) Björn Nienborg
Thermal Systems and Buildings
Fraunhofer Institut für Solare Energiesysteme ISE
Heidenhofstr. 2, 79110 Freiburg, Germany
Tel.: +49 (0)761 4588-5341 FAX: +49 (0)761 4588-9333
http://www.ise.fraunhofer.de