[TRNSYS-users] GenOpt Java heap space error

[Benoît Andlauer]

Dear Jeff, Dear all,

The simulation runs perfectly in TRNSYS with the same parameters as the
initialization simulation in GenOpt, and completes in a few minutes.
When I choose to display the TRNSYS progress bar while running GenOpt, I can
check that the TRNSYS simulation terminates. But, then, there is this very
long pause, and after that the error message prompts in GenOpt window.

I thus suspect that the problem lies in the communication of the simulation
results between TRNSYS and GenOpt.

Best regards,
Benoît

2010/3/4 Jeff Thornton <thornton at tess-inc.com>

> <However, when I couple TRNOpt with this simulation, GenOpt only runs the
> Initialization simulation, and then "waits" for about one to two hours and
> stops, prompting the following error message:
>
> Initialize.
> java.lang.OutOfMemoryError:
> Java heap space
>
> GenOpt terminated with error.>
>
> Check one thing for me.  Does the simulation run (outside of the GenOpt
> environment) with the same parameters that is causing the problems inside
> of Genopt.  What I mean is that if GenOpt is killing with a=10 and b=5 and
> c=6, does setting a=10, b=5 and c=6 in a regular simulation cause any
> problems?
>
> Let us know!
>
> Jeff
>
>
> Jeff Thornton
> President - TESS, LLC
>
> 22 North Carroll Street - Suite 370
> Madison WI 53703 USA
>
> Phone: 608-274-2577
> Fax: 608-278-1475
> E-mail: thornton at tess-inc.com
> Web: www.tess-inc.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100305/841ecadb/attachment-0005.htm>