[TRNSYS-users] WG: error in Type 556 ?
Andreas Heinz
andreas.heinz at tugraz.at
Tue Mar 2 14:18:40 PST 2010
... and here comes the attachment :-)
---
Dr. Andreas Heinz
Institut für Wärmetechnik / Institute of Thermal Engineering
TU Graz / Graz University of Technology
Inffeldgasse 25b, A-8010 Graz
Tel.: +43-316-873-7313
Fax.: +43-316-873-7305
andreas.heinz at tugraz.at
www.iwt.tugraz.at
-----Ursprüngliche Nachricht-----
Von: Andreas Heinz [mailto:andreas.heinz at tugraz.at]
Gesendet: Dienstag, 2. März 2010 23:16
An: 'trnsys-users at cae.wisc.edu'
Betreff: error in Type 556 ?
Dear TRNSYS-Users !
I just found out about a very strange behaviour of Type 556 "Horizontal Ground-Coupled Heat Exchanger".
Im using a very simple configuration, where I enter the heat exchanger with a constant mass flow and an inlet temperature, which is always 3 Kelvin lower than the outlet temperature.
The problem is, that the resulting outlet temperature out of Type556 is strongly depending on the TRNSYS-timestep. For example, if I use a time step of 6 min I get -3.8°C, if I use 1 min I get -11.6°C.
I attached a Studio-File with an example.
Does anyone have an explanation or has anyone observed a similar behaviour ?
Are there alternatives to this type for simulating a ground coupled horizontal pipe ?
I would be grateful for any support.
regards,
Andreas
---
Dr. Andreas Heinz
Institut für Wärmetechnik / Institute of Thermal Engineering
TU Graz / Graz University of Technology
Inffeldgasse 25b, A-8010 Graz
Tel.: +43-316-873-7313
Fax.: +43-316-873-7305
andreas.heinz at tugraz.at
www.iwt.tugraz.at
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project5.tpf
Type: application/octet-stream
Size: 65639 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100302/f4c69a7c/attachment-0005.obj>
More information about the TRNSYS-users
mailing list