[TRNSYS-users] Trnsys3D

[Geoffrey VAN MOESEKE]

Hello Nicolas

 

For your second question, version 2.0 of trnbuild shows the import option when you open the software without any project loaded:

 

 

But once a project is loaded, the file menu changes and allows you to reexport your .b17 to a .idf.

 

 

You must close the project or open a new sessions before importing another .idf.

 

Best regards.

 

Ps : I'm interested in answers for your first question...

 

 

---------------------------------------------------------------------------------------------------------------------------------

Geoffrey van Moeseke

ir.architecte

 

MATRIciel SA

Place de l'Université 25, 1348 Louvain-la-Neuve

tel: (+32) 10 24 15 70 - fax: (+32) 10 24 15 60

 

De : Nicolas Heijmans [mailto:nicolas.heijmans at bbri.be] 
Envoyé : vendredi 25 juin 2010 17:17
À : transsolar at transsolar.com; trnsys-users at cae.wisc.edu
Objet : [TRNSYS-users] Trnsys3D

 

Hello,

 

I'm trying to use trnsys3D, which seems very promising. 

I have two very simple questions. 

 

1)

Is it possible to define two walls in the same plane, as shown on the following figure ?

It's a door inside a wall.

 

According to my experience, this is not possible because TRNSYS3D will define two walls :

-          the door (0.9*2.01),

-          the full wall (3*3.44), and not (3*3.44) - (0.9*2.01)

 

 

 

Could you please correct me if I'm wrong/confirm what I think/give me any trick that I would have missed? (Probably the only option is the following :

 

 

 

2)

The manual seems to say that it is possible to directly import .idf file in TRNbuild...

 

 

But this option is not available in my version of TRNbuidl (2.0) :

 

 

Is this normal ?

 

Thanks,

 

Kind regards,

 

Nicolas Heijmans

Belgian Building Research Institute (www.bbri.be <http://www.bbri.be/> )
Av. P. Holoffe 21, B-1342 Limelette, Belgium
tel. : + 32 2 655 77 87 fax : + 32 2 653 07 29

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 6023 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 5192 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0013.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 10542 bytes
Desc: image005.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0014.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 9003 bytes
Desc: image006.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0015.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.png
Type: image/png
Size: 65366 bytes
Desc: image008.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.png
Type: image/png
Size: 21298 bytes
Desc: image009.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100628/133a3ea3/attachment-0011.png>