[TRNSYS-users] Using to pairs of simulation start time and simulation stop time in a project

[Marco Scarpellino]

Hello Mehdi,

you can use a forcing function for "cooling control signal" wich is one when
your system are in summer period and 0 in winter; and another forcing
function for "winter control signal ". You have to use an equation wich
combine this control signal with the temperature control signal. If you want
i can send you an example.

Regards

Marco Scarpellino


2010/6/6 mahdi shahrestani <mahdishahrestani at yahoo.com>

> Hello everybody
>
> My project has two main parts, first cooling coil and the second heating
> coil. I want to run the cooling coil in summer and heating coil in winter.
>
> As far as I know, start and stop run time in “control card” are applicable
> to all equipment but I need to run cooling part in summer and heating parts
> in winter.
> I was wondering if any body could give me some hint to solve the issue.
>
> Regards
> Mehdi
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100607/9c9d7fd4/attachment-0005.htm>