[TRNSYS-users] Air Cooled Chiller ( Type 655 ) - Major problem

[Jeff Thornton]

<As you see there is no any connection between chilled water set point and
ambient temperature with outputs. Changing those two input parameters have
not any effect on output COP?>

It's likely that you have something wrong in either your data file, your
inputs, or your parameters.  Double-check everything.  I just ran a simple
test that shows that the air cooled chiller behaves as expected with
changing ambient and chilled water set point temperatures - see attached. 
 If I were to guess, I would say that you have one of your parameters
wrong....

Jeff


Jeff Thornton
President - TESS, LLC

22 North Carroll Street - Suite 370
Madison WI 53703 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton at tess-inc.com
Web: www.tess-inc.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Type655.jpg
Type: image/jpeg
Size: 144220 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100601/6cffdbf9/attachment-0005.jpg>