[TRNSYS-users] Range check error

[David Bradley]

Umit,
  Normally, that should work fine. A "range check" error is something 
inside the Fortran code that isn't being handled correctly. I would 
recommend you send your input file to your distributor and see if they 
can track down the cause of the problem.
Kind regards,
  David

On 6/29/2010 09:56, "Ümit Esiyok" wrote:
> Dear All,
>
> I would like to control lighting loads in a building with Time(09-18) and
> Controller (Upper,lower Radiation).
> For Time Control I am using Type 14d and for Radiation Control a
> Controller Type 2d (Solver 0) but I got "Range check error". I changed in
> Control Cards Debug Mode from False to true but nothing changed.My
> Questions are is it true to connect Type 14d ---an Equation---Controller
> Type2d, what can be he reason for Range check error
>
> Best Regards
>
>
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com