[TRNSYS-users] Error: Range check error

[Fieberg, Christian]

Nicola,

 

I think the error is related to Type 56.

Type 56a is designed for a simulation time of < 5 years. If you want to
simulate a longer period you should use Type 56b (with non-standard
output).

That should solve the problem.

 

Best regards,

 

Christian

 

 

Von: Nicola Sorbi [mailto:nisorbi at hotmail.com] 
Gesendet: Montag, 21. Juni 2010 15:28
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] Error: Range check error

 

Dear all,

I'm doing a 25 years simulation with a timestep=1 h. 

The software works correctly until the 5th year, than it stops.

In the list file there is NOT any error, but in TRNEexe gives a new
window with the error "Range check error".

What's wrong?

Regards

Nicola

 

--------------------------------------------------

Ing. Nicola Sorbi PhD

Perugia University

06127 Perugia

ITALY

Ph. +39 075 5853930

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/1c499f43/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1262 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/1c499f43/attachment-0001.jpeg>