[TRNSYS-users] problem with printer 25/65c

Marius Müller m.mueller at solitem.de
Thu Jun 17 07:39:48 PDT 2010


Hello everybody.

I have the problem that I use different printer and export their plot in excel, and they do not show the same results.

I use type65c to plot every time step and type25 to plot integrated results in the end. 

But the results from type25 are not the same as in type65c!

It seems type25 does not cover the whole simulation time. When I i.e. print the time values with both types, type25 should show only the last value when I do not integrate. Am I right? For short periods like a week it is working, but when I simulate for a longer time, type25 always shows a time value a few hundred hours before the last value of type65c.

Any idea what could cause this? I set the value for the printing interval in type25 to zero, so this type should just plot at the end..

 

Thanks for your help,

Marius

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100617/fe1298a5/attachment-0001.htm>


More information about the TRNSYS-users mailing list