[TRNSYS-users] Virtual window in TRNBUILD
Marcello Caciolo
mcaciolo at hotmail.com
Fri Jul 30 01:32:55 PDT 2010
Dear TRNSYS users,
I am trying to model a zone with an opened window in TRNSYS 16. For the
thermal model, I use the type56 with a window of the type: "Virtual
(open or nonexistent) Window" (WINID 1) from TESS Library.
Unfortunately, when I start the simulation, I get the following error:
"Une valeur négative ou supérieure à 1 a été trouvé pour l'absorption
non visuelle W4_front pour la fenêtre no 1 : abs_nonvis = -.0008717874 à
l'angle = 0"
(A value negative or greater than 1 was found for nonvisual absorption
W4_front for Window-ID 1 : abs_nonvis = -.0008717874 at angle = 0)
I see that other people reported this problem in this forum, but I have
not found any solution.
Do you know how to solve this issue?
Thanks in advance for your attention.
Best regards,
Marcello CACIOLO
--
--------------------------------------------------------------------------------
Marcello CACIOLO
Ingénieur de Recherche
Centre Energétique et Procédés - Mines ParisTech
60, Bd Saint-Michel
75272 Paris Cedex 06 France
Tél : +33 (0)1 40 51 94 21 Fax : +33 (0)1 40 51 94 49
E-mail: marcello.caciolo at ensmp.fr
--------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100730/aa6bd4e5/attachment-0005.htm>
More information about the TRNSYS-users
mailing list