[TRNSYS-users] meteorological data

[manoj kumar singh]

*Dear marcos,*

*I better suggest you to take the average over one hour of the temperature
data you have collected and then use it in TMY format.  Since inside
building thermal load at one hour interval is meaningful but less than that
it will have lot of errors so I think TRNSYS is written for doing hourly
calculations. *
**
*regards,*
**
*manoj*
*

*
On Mon, Jul 26, 2010 at 11:14 PM, PORRAS PERALES, MARCOS <
100075609 at alumnos.uc3m.es> wrote:

> Hello TRNSYS-USERS,
> I get data from a meteorological station every 10 minutes, when I enter
> that
>   data into a *. TMY, TRNSYS uses these data every hour, how I can do to
>   simulate TRNSYS every 10 minutes??
>
>   thanks in advance
>
>   --
>   Marcos Porras
>
> Universidad Carlos III de Madrid
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>



-- 
  *MANOJ KUMAR SINGH, IGBC AP*
  RESEARCH SCHOLAR
  INSTRUMENT DESIGN AND DEVELOPMENT CENTRE (IDDC)
  IIT DELHI
  HAUZ KHAS, NEW DELHI 110016
  INDIA.

Alternate E mail :- mksinghtu at rediffmail.com
                           mksinghtu at iddc.iitd.ac.in

 MOBILE NO. 09868820037

RESIDENTIAL ADDRESS

  *MANOJ KUMAR SINGH, IGBC AP*
  RESEARCH SCHOLAR
  ZASKAR HOSTEL, ROOM NO WC-12,
  IIT DELHI
  HAUZ KHAS, NEW DELHI 110016
  INDIA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100727/f725df07/attachment-0005.htm>