[TRNSYS-users] Problem with Type 55: Periodic Integrator - reset time

Eric Wilson eric.jh.wilson at colorado.edu
Tue Jul 20 18:25:05 PDT 2010


Hi all,

In a project of mine, none of my Type 55 integrators reset after a cycle as
they should (they continue to integrate until the end of the simulation),
unless they are set to a monthly cycle with a value of -1. In a blank new
project, they work fine.  Has anyone encountered this problem?

* Model "Type55" (Type 55)
*

UNIT 78 TYPE 55     Type55
*$UNIT_NAME Type55
*$MODEL .\Utility\Integrators\Periodic Integrator\Type55.tmf
*$POSITION 815 50
*$LAYER Main #
PARAMETERS 7
1        ! 1 Integrate or sum input
1.0        ! 2 Relative starting hour for input
24        ! 3 Duration for input
24        ! 4 Cycle repeat time for input
24        ! 5 Reset time for input
start        ! 6 Absolute starting hour for input
stop        ! 7 Absolute stopping hour for input
INPUTS 1
supply_diam        ! HVAC_Inputs:supply_diam ->Input
*** INITIAL INPUT VALUES
0.

Many thanks,
Eric

--
Eric Wilson
M.S. Candidate, Building Systems Program
Dept of Civil, Env., and Arch. Engineering
University of Colorado at Boulder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100720/5af8891a/attachment-0005.htm>


More information about the TRNSYS-users mailing list