[TRNSYS-users] problem using plotter : Type65

[PERRIER Rémi 226004]

Hi everybody,

 

I just developed a new component in C++. When I put a Type65 in my deck and launch the simulation I receive the "invalid floating point" error message, even if Type65 is not linked to my component. Strange thing is that if I right click two times on the plotter (like "pause" and "resume" the simulation) everything works correctly. I checked in debug mode and with a printer, all variables and outputs are correct.

 

I use global variables to stock my data so there may be a problem with the allocated memory...

 

Thanks for your help.

 

Rémi PERRIER

 

 

CEA INES

Laboratoire DTS / LETh

Bâtiment PUMA 3, P112

BP 332 - 50, avenue du Lac Léman - 73377 Le Bourget du Lac  FRANCE

Mobile : +33 (0)6 76 95 91 86

Email : remi.perrier at cea.fr

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100723/21f55a48/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2236 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100723/21f55a48/attachment-0001.jpeg>