[TRNSYS-users] Question about the setting of FAN in TRNFlow

[SUNLIANG CAO]

Hi, everyone.

I have a question about the usage of FAN in TRNFlow. 

When we set up a fan link (air link), we need to input fan curve, which are pairs of pressure difference and fan flow rate.
 
And the basic principle of TRNFlow is that it first calculate the pressure difference; and then based on that pressure difference, calculate the fan flow rate according to the fan curve we input.

However, currently, I have a case that need to input both of the fan flow rate and pressure difference (eg. fan pressure difference = 600 Pa, fan flow rate = 60 m^3/h). How can I set that in TRNFlow?

 

Thank you very much.

 

Kind Regards,
Sunliang
 		 	   		  
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
https://signup.live.com/signup.aspx?id=60969
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100714/415c3a46/attachment-0001.htm>