[TRNSYS-users] Changing a parameter to input in components

[David Bradley]

Mehdi,
   In addition to changing the proforma, you also need to modify and 
recompile the Fortran code of the Type and change the number of 
parameters and inputs that it expecting to be passed.
Best,
  David


On 7/11/2010 17:37, mehdi wrote:
>
> Hello everybody
>
> I have a question about changing a "Parameter" into "Input" in components.
>
> For example in a pipe component, I have changed one of parameters to 
> input (in Performa) but after run there were two errors mentioned that
>
> There is one missed parameter and one more than normal input.
>
> I think there should be a way to solve such a problem.
>
> I was wondering if anybody could give some advice.
>
> Regards
>
> Mehdi Shahrestani
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100712/d440c8db/attachment-0001.htm>