[TRNSYS-users] (no subject)

[salim mokraoui]

Dear all,

 

I’m simulating a 5 zone building using a PID controller for each zone
(temperature control). The parameters of PID (type 23) are predetermined and
work well with another example (1 zone building). With the 5 zone building
the simulation stops after 1 hour and the error message says: zone 5 surface
47 pane temperature out of bounds at time 1.

How to overcome this problem ?

 

Salim MOKRAOUI

Faculté des sciences de Nancy - LERMAB

BP 239

54506 Vandoeuvre.

Tél 03 83 68 48 47 - mél salim.mokraoui at lermab.uhp-nancy.fr

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100706/68e5c5cd/attachment-0001.htm>