[TRNSYS-users] problem using plotter : Type65
PERRIER Rémi 226004
remi.perrier at cea.fr
Fri Jul 23 03:30:43 PDT 2010
Hi everybody,
I just developed a new component in C++. When I put a Type65 in my deck and launch the simulation I receive the "invalid floating point" error message, even if Type65 is not linked to my component. Strange thing is that if I right click two times on the plotter (like "pause" and "resume" the simulation) everything works correctly. I checked in debug mode and with a printer, all variables and outputs are correct.
I use global variables to stock my data so there may be a problem with the allocated memory...
Thanks for your help.
Rémi PERRIER
CEA INES
Laboratoire DTS / LETh
Bâtiment PUMA 3, P112
BP 332 - 50, avenue du Lac Léman - 73377 Le Bourget du Lac FRANCE
Mobile : +33 (0)6 76 95 91 86
Email : remi.perrier at cea.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100723/21f55a48/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2236 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100723/21f55a48/attachment.jpeg>
More information about the TRNSYS-users
mailing list