[TRNSYS-users] Problem with Type 55: Periodic Integrator - reset time
Eric Wilson
eric.jh.wilson at colorado.edu
Tue Jul 20 18:25:05 PDT 2010
Hi all,
In a project of mine, none of my Type 55 integrators reset after a cycle as
they should (they continue to integrate until the end of the simulation),
unless they are set to a monthly cycle with a value of -1. In a blank new
project, they work fine. Has anyone encountered this problem?
* Model "Type55" (Type 55)
*
UNIT 78 TYPE 55 Type55
*$UNIT_NAME Type55
*$MODEL .\Utility\Integrators\Periodic Integrator\Type55.tmf
*$POSITION 815 50
*$LAYER Main #
PARAMETERS 7
1 ! 1 Integrate or sum input
1.0 ! 2 Relative starting hour for input
24 ! 3 Duration for input
24 ! 4 Cycle repeat time for input
24 ! 5 Reset time for input
start ! 6 Absolute starting hour for input
stop ! 7 Absolute stopping hour for input
INPUTS 1
supply_diam ! HVAC_Inputs:supply_diam ->Input
*** INITIAL INPUT VALUES
0.
Many thanks,
Eric
--
Eric Wilson
M.S. Candidate, Building Systems Program
Dept of Civil, Env., and Arch. Engineering
University of Colorado at Boulder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100720/5af8891a/attachment.htm>
More information about the TRNSYS-users
mailing list