[TRNSYS-users] shades in openings by type67 and 68
rgaray at labein.es
rgaray at labein.es
Fri Jul 16 05:55:41 PDT 2010
Dear Laia,
You could create the window not as an opening in the wall, but as an
"aditional window" which is not linked to any wall.
This way you can assign a different orientation to each of them. Then you
can link the shading device to the orientation referred to the shaded
element while mantaining the unshaded orientation for the other surface.
Hope that helps.
--------------------------------------------------------------------------
Roberto Garay Martinez
Labein-Tecnalia
Unidad de Construcción y Desarrollo del Territorio
c/Geldo. Parque Tecnológico de Bizkaia
Edificio 700
48160 Derio (Bizkaia)
Tel.: 34 94 607 33 00
Fax: 34 94 607 33 49
www.labein.es
---------------------------------------------------------------------------
Visite nuestro blog:
http://www.energiaenedificacion.com
--------------------------------------------------------------------------
trnsys-users-request at cae.wisc.edu
16/07/2010 12:58
Por favor, responda a
trnsys-users at cae.wisc.edu
Para
trnsys-users at cae.wisc.edu
cc
Asunto
TRNSYS-users Digest, Vol 67, Issue 44
Send TRNSYS-users mailing list submissions to
trnsys-users at cae.wisc.edu
To subscribe or unsubscribe via the World Wide Web, visit
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
trnsys-users-request at cae.wisc.edu
You can reach the person managing the list at
trnsys-users-owner at cae.wisc.edu
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:
1. Type 43 external file format and active layer activation (Chris)
2. shades in openings by type67 and 68 (Laia Cases - iMat)
----- Mensaje de Chris <clashmar at shaw.ca> en Thu, 15 Jul 2010 21:05:03
-0600 -----
Para:
trnsys-users at engr.wisc.edu
Asunto:
[TRNSYS-users] Type 43 external file format and active layer activation
Hello,
I have two questions:
1) I am trying find the input file format required for the Type 43a
(Part Load Performance). I can't find any documentation that describes
this nor have I found an example. Can someone point me in the right
direction?
2) I want to create an active layer type but the "Active Layer" radio
button in the Layer Type Manager is greyed out. How do I make this
available?
Thank you in advance,
Chris Lashmar
----- Mensaje de Laia Cases - iMat <lcases at imat.cat> en Fri, 16 Jul 2010
12:58:23 +0200 -----
Para:
trnsys-users at cae.wisc.edu
Asunto:
[TRNSYS-users] shades in openings by type67 and 68
Hi trnsys users,
how do I manage if in the same facade there are one window(window1) with
shade by overhang and by shading mash, and another window(window2) without
overhang and with same shading mask as windiow1? as i understand, there is
a problem if one use 2 type67 or 2 type68. By the other hand, if I use
type68 with type34 for window1 and type 67 for window2, I get less demand
of heating for window1 than for window 2, that is not congruent.
I hope it is understanding, any suggestion?
thanks in advance
Laia
--
Laia Cases
Unitat de Condicionament Tèrmic
iMat - Centre Tecnològic de la Construcció
lcases at imat.cat
www.imat.cat
Wellington 23 · E-08018 Barcelona
T +34 93 553 97 95
F +34 93 553 97 96
Imprimiu aquest document només si és necessari
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
__________________________________________________________________________________________________________
Imprime solo lo imprescindible, recuerda tu compromiso con el MEDIO AMBIENTE
Behar beharrezkoa baino ez imprimatu, gogoratu zure INGURUGIROArekiko konpromezua
Before printing think about the ENVIRONMENT
__________________________________________________________________________________________________________
Este mensaje se dirige exclusivamente a su destinatario y puede contener informacion privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilizacion, divulgacion o copia sin autorizacion esta prohibida en virtud de la legislacion vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma via y proceda a su destruccion.
Mezu honek eta erantsita dituen agiriek (baldin baditu) isilpeko informazioa izan dezakete. Hori dela eta, hutsegite baten ondorioz jasotzen duenak jakin beza bertan dagoen informazioa ezkutukoa dela eta legeak galarazi egiten duela berori baimenik gabe erabiltzea.
This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/e7178917/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 30755 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/e7178917/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 27188 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/e7178917/attachment-0001.jpeg>
More information about the TRNSYS-users
mailing list