[TRNSYS-users] Type 16c_Solar Radiation Processor
Laia Cases - iMat
lcases at imat.cat
Mon Jul 12 00:20:40 PDT 2010
Hi trnsys users,
I am using type16c to get diffuse rad from global data radiation. But
type56 needs angle of incidence on horitzontal, and I don't know how to
get angle of incidence on horitzontal because this type doesn't give it
as an output. Does anybody know how I can get it?
Thanks in advance
Laia
En/na Matt Duffy ha escrit:
>
> Dear Bastien,
>
> "Time of last data read" and "Time of next data read" need to be
> connected from your external data reader, Type9, to your Type16
> radiation processor, respectively. I am not 100% sure why - most
> likely a historical or fortran reason, but please make sure to connect
> those.
>
> Best regards,
>
> Matt Duffy
>
>
>
> *----- Original Message -----*
> *From:* "Bastien GARBAY" <garbay at enertech.fr>
> *Sent:* Thu, May 20, 2010 2:36
> *Subject:* [TRNSYS-users] Type 16c_Solar Radiation Processor
>
> Dear all,
>
> I would like to estimate the solar radiation on a tilted surface with
> Type 16c by choosing Mode 2 (Total radiation surface on a horizontal
> surface, ambient temperature and relative humidity datas are known).
> These threes datas were measured with a step time of 10 minutes from
> November until Februar. I want to calculate the effective radiation on
> a northern and a southern orientation, in order to estimate the
> effective solar gains with a step time of 10 minutes.
>
> I can't obtain correct results because I think I don't understand the
> inputs 4 and 5 of Type 16c. What does "Time of last data read" and
> "Time of next data read" mean?
> Is it possible to use this type with a timestep of 10 minutes but with
> measures on only 4 months (not a complete year)?
>
> Thanks for your help and your answer!
>
> Bastien
>
>
>
>
> ------------------------------------------------------------------------
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu <javascript:bodyCreateMail('TRNSYS-users%40cae.wisc.edu')>
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
--
*Laia Cases*
Unitat de Condicionament Tèrmic
*iMat - Centre Tecnològic de la Construcció
lcases at imat.cat <mailto:lcases at imat.cat>
www.imat.cat <http://www.imat.cat/>*
Wellington 23 · E-08018 Barcelona
T +34 93 553 97 95
F +34 93 553 97 96
Imprimiu aquest document només si és necessari
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100712/d58dd082/attachment.htm>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100712/d58dd082/attachment-0001.htm>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100712/d58dd082/attachment-0002.htm>
More information about the TRNSYS-users
mailing list