[TRNSYS-users] windows in Trnsys
Kersken, Matthias
Matthias.Kersken at ibp.fraunhofer.de
Mon Jul 5 23:58:57 PDT 2010
Dear Mr. Beuckelaer!
Type35a/b (Windows) could be used for a "manual" window; the ratio of energy
transmittance must be supplied as an input.
When You create a TRNSYS-glazing in window5 You HAVE TO CHOOSES A FIX frame
to avoid a TRNSYS-error. TRNSYS ignores this fixed frame.
Please refer to: http://www.trnsys.com/FreeDownloads/WindowTutorial.pdf
With best regards,
Matthias Kersken
---
Dipl.-Ing. Matthias Kersken
Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme
Fraunhofer-Institut für Bauphysik
Institutsteil Holzkirchen
Fraunhoferstraße 10
83626 Valley
eMail: Matthias.Kersken at ibp.fraunhofer.de
Telefon 08024 / 643-204
Telefax 08024 / 643-366
www.ibp.fraunhofer.de <http://www.ibp.fraunhofer.de/>
Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems
Fraunhofer Institute for Building Physics
Branch Holzkirchen
Fraunhoferstraße 10
D-83626 Valley
eMail: <mailto:Matthias.Kersken at ibp.fraunhofer.de>
Matthias.Kersken at ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 / 643-366
<http://www.ibp.fraunhofer.de/> www.ibp.fraunhofer.de
---
_____
Von: Joke De Beuckelaer [mailto:joke.d at vkgroup.be]
Gesendet: Montag, 5. Juli 2010 10:28
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] windows in Trnsys
Dear Trnsys-users,
Ive some question concerning windows in Trnsys. When you want to implement
a window (with a known U-value and g-value) but there is no corresponding
window in the library, can you somewhere adapt the U-value and g-value?
I know you can use window5 to make a new window in your library, but
sometimes I dont know the layers of my window but just the U-value en
g-value. Can you adapt perhaps the values of the additional heat resistance
of an external shading device to achieve the wanted value? Or adapt the
U-value of the profile?
When you do use window5: you have to introduce a profile too. But in
trnsys, you select the created window under Glazing. Do you then still
have to introduce the U-value of the profile in Trnsys or
?
Thanks in advance,
Joke De Beuckelaer
project engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100706/db0874b8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 7103 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100706/db0874b8/attachment.bin>
More information about the TRNSYS-users
mailing list