[TRNSYS-users] Modifying a zones active wall componets

[David Bradley]

Paul,
 If you need to alter part of a wall, there is no need to delete it. You 
can go to the wall Typemanager and modify any of the layers (active or 
non) therein. This is done from the Typemanager and not from the zone 
because the same wall construction may be used in more than one zone.
Best,
 David


PAUL COALES wrote:
> Hi 
>
> I need to alter the non-active part of a Wall with an active layer.  I'm happy to create a new Wall to do this but the current Wall with active layer does not have the Delete pushbutton active when selected within a zone window.
>
> In short, how do I replace Walls with active layers in a Zones Walls description?  The only way I can see to do this is to start from scratch.
>
> Kind Regards
> Paul
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************