[TRNSYS-users] (no subject)

[#SEK JUN-YANG#]

Dear trnsys users,
 
I've simulated a conventional air condition system with 8 zones representing the floor area. I've split the 8 zones into 2 groups with different areas and attempted to use 2 thermostats, type 108, to control each group to obtain 2 different sets of results. However, when I link the building to type 108, I am only able to link one zone to the monitoring temperature. I would like to find out if it is possible to either seperate the 8 zones into 2 groups and controlled by 2 thermostats, or combine the total zones to be controlled by one thermostat. Any advice would be greatly appreciated
 
Best Regards,
Sek Jun-Yang
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100113/2b98cb3d/attachment-0005.htm>