[TRNSYS-users] error message 105 (type 557 en 504: Tess models GSHP)

Joke De Beuckelaer JDebeuckelaer at vkgroup.be
Tue Jan 12 22:57:43 PST 2010


Dear Matt,

 

I had already done that, but it was not a solution.

I found at the internet, that it may be necessary to ask for new DLL's at your trnsys provider. So I will try that.

 

Thanks,

Joke

 

________________________________

De : Matt Duffy [mailto:duffy at tess-inc.com] 
Envoyé : mardi 12 janvier 2010 17:03
À : Joke De Beuckelaer; trnsys-users at cae.wisc.edu
Objet : RE: [TRNSYS-users] error message 105 (type 557 en 504: Tess models GSHP)

 


Dear Joke De Beuckelaer,

Please reinstall your TESS Libraries into your TRNSYS directory. The install will place the respective DLL's in the proper folder, so you can run your simulation.

Best regards,

Matt Duffy




----- Original Message -----
From: "Joke De Beuckelaer" <jdebeuckelaer at vkgroup.be> 
Sent: Mon, January 11, 2010 0:50
Subject: RE: [TRNSYS-users] error message 105 (type 557 en 504: Tess models GSHP)

Dear Matt,

 

Thanks for your answer.

 

Component 504 and 557 are causing the errors. So I think I have not the appropriate DLL for the tess library. 

 

Greetings

Joke

 

________________________________

De : Matt Duffy [mailto:duffy at tess-inc.com] 
Envoyé : samedi 9 janvier 2010 0:46
À : Joke De Beuckelaer; trnsys-users at cae.wisc.edu
Objet : Re: [TRNSYS-users] error message 105 (type 557 en 504: Tess models GSHP)

 


Dear Joke,

What component (the error should tell you the component unit number and type number) is causing the error? Make sure you have the appropriate DLL for that component.

Best regards,

Matt Duffy



----- Original Message -----
From: "Joke De Beuckelaer" <jdebeuckelaer at vkgroup.be> 
Sent: Fri, January 8, 2010 1:36
Subject: [TRNSYS-users] error message 105 (type 557 en 504: Tess models GSHP)

 <https://webmail.fusemail.com/fckeditor/editor/images/spacer.gif> Dear trnsys-users,

 

I've simulated a vertical ground heat exchanger (type 557) coupled at a ground-source heat pump (type 504). 

 

When I run the simulation I've got an error message 105 : « A Type was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please linke the TYPE or remove it from the input file. »

 

I looked at internet for a solution, but there I found that the problem normally occors when defining an input-file of your own. So I don't understand why I get this error, because they are just types of the tess library.

 

Does anyone know a solution?

 

 

Thanks in advance,

  Joke De Beuckelaer    
  project engineer 

 

________________________________

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu <https://webmail.fusemail.com/webmail.php> 
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100113/d68166e5/attachment-0005.htm>


More information about the TRNSYS-users mailing list